|
Laminate Flooring Install Kit
Installation kit for glueless type laminate floors. Kit includes: 20 floor spacers, laminate floor tapping block, economy pull bar, and complete instructions.
View Details
|
286141 |
Laminate Flooring Install Kit |
4 |
17.49 |
/ EA |
10-26 |
|
|
Qt Premixed Floor Patch
Ready-to-use flooring patch for smoothing and repairing interior and exterior concrete, wood, and masonry. Fast drying premixed formula dries in only 2 to 3 hours. No primers or additives needed. Apply directly to clean, dry wood. Lightly dampen concrete and masonry using clean water and a stiff brush or sponge. Do not leave puddles or standing water. Open, stir if product separation has occurred, and apply product from feather edge to 1 In. maximum using a putty knife, broad knife, or trowel. If applying thicker than 1/4 In., apply in 1/4 In. layers and allow 2 to 3 hours drying between layers. Patch is dry when it cannot be indented with the tool handle. Thick applications, low temperatures, and high humidity require longer drying times. Clean up with warm water and a damp sponge before product hardens. Coverage: 4 to 5 Sq. Ft. per quart at 1/8 In. thickness.
View Details
|
263360 |
Qt Premixed Floor Patch |
6 |
13.99 |
/ EA |
12063 |
|
|
Henry Feather Finish Patch 7#
A Portland cement-based patch and skim coat that can be installed over almost any surface to provide a smooth and permanent finish prior to the installation of floor coverings or patching holes, gouges, cracks, and seams, in subfloors suchas concrete, brick, masonry, terrazzo and ceramic tile, wood, and metal, prior to the installation of any floor covering. Specially formulated with an ultra fast dry time. Dries in as little as 15 minutes. Can be installed from a feather edge to 5 In. depth. No primers or additives needed, just mix with water. Recommended mixing ratio is 2 parts powder to 1part water (by volume). For the entire bag, mix 1.75 quarts of water with the 7 Lb. bag. Coverage: Trowel with flat edge, 7 Lb. box covers approximately 198 Sq. Ft. at skim coat. Temperature should be above 65 deg. F. Remove dirt, wax, polish, paint, and other foreign material from floor prior to application. Mixing product with a 1/2 In. drill at a minimum650 RPM will produce a creamier and easier-to-apply mix. If the product begins to harden in the bucket use a drill to re-whip. Will not promote the growth of mold and/or mildew. 7 Lb. box.
View Details
|
274399 |
Henry Feather Finish Patch 7# |
1 |
27.49 |
/ EA |
12163 |
|
|
Pint Bonding Liquid
DAP /Bondex bonding liquid and floor leveler additive is a versatile product that can be used as a glue to bond new concrete to old and as an additive to increase adhesion and flexibility in plaster, mortar, concrete, floor leveler, stucco, and waterproof cement paint. For use indoors or outdoors. DAP Concrete Floor Leveler must be mixed with DAP Bonding Liquid & Floor Leveler Additive.
View Details
|
272092 |
Pint Bonding Liquid |
1 |
13.99 |
/ EA |
35082 |
|
|
48" Wood Tackstrip
Meets CARB (California Air Resources Board) regulation for low VOC content. MD tack strip holds the carpet in place along walls and doorways. Tack strip is a wood strip with angled tack points jutting up that grab the carpet's baking. Tack strip helps to insure a smoother, professional looking installation. 7/8" W. x 4' L. 100-pieces per case. 400 lineal ft. per case.
View Details
|
276971 |
48" Wood Tackstrip |
37 |
0.69 |
/ EA |
75320 |
|
|
1-3/8"x3' Brs Gripper
Secures and protects the exposed edge of stretch-in carpet at doorways and other openings. For jute or canvas-backed carpets. Durable aluminum, fluted design with a mill finish. Screw nails included. Carpet metal installation on concrete surface suggestion: Drill a hole in the concrete, insert a 3/16" x 1-1/4" or 1/4" x 1-1/4" wood dowel. Use the screw nails provided with carpet metals, insert into dowel, expanding the dowel to lock in place.
View Details
|
262404 |
1-3/8"x3' Brs Gripper |
2 |
9.79 |
/ EA |
79053 |
|
|
1-3/8"x6' Brass Carpet Grip
Secures and protects the exposed edge of stretch-in carpet at doorways and other openings. For jute or canvas-backed carpets. Durable aluminum, fluted design with a mill finish. Screw nails included. Carpet metal installation on concrete surface suggestion: Drill a hole in the concrete, insert a 3/16" x 1-1/4" or 1/4" x 1-1/4" wood dowel. Use the screw nails provided with carpet metals, insert into dowel, expanding the dowel to lock in place.
View Details
|
262390 |
1-3/8"x6' Brass Carpet Grip |
1 |
14.49 |
/ EA |
79137 |
|
|
 |
283062 |
Ram Board Edge Tape |
11 |
14.79 |
/ EA |
RBET 2.5-180 |
|
|
1.41x42 In/out Crpt Tape
1.41X42 IN/OUT CRPT TAPE
View Details
|
261071 |
1.41x42 In/out Crpt Tape |
2 |
10.29 |
/ EA |
286373 |
|
|
1.41"x42' Indr Cprt Tape
Double sided adhesive cloth tape for permanent carpet installation. Indoor use, ideal for high traffic areas such as hallways and bedrooms. 1.42 In. W. x 42 Ft. L. roll.
View Details
|
271411 |
1.41"x42' Indr Cprt Tape |
13 |
10.29 |
/ EA |
286375 |
|
|
10oz Self-level Sealant
Superior 1 component self-leveling sealant provides superior adhesion, flexability, and durability. Construction grade polyurethane sealant is used for sealing cracks and joints in horizontal concrete surfaces such as sidewalks, driveways, industrial floors, parking decks, patios, and steps. May also be used for flashing and below grade waterproofing membranes. Sealant is nonstaining, resistant to moisture and staining, and has virtually no shrinkage. Standard caulk gun use. Coverage is 12 linear ft. at 1/2" x 1/4" joint. Color: Gray. 10 oz. tube.
View Details
|
260055 |
10oz Self-level Sealant |
2 |
10.99 |
/ EA |
8660-10 |
|
|
Ram Board Stair Armor 6pk
STAIR ARMOR 6-PK
34" X 19" STAIR TREAD AND RISER PROTECTION
Ram Board Stair Armor is designed to conform and protect every portion of the stair including the riser, bull nose, and tread. Spill guard technology boasts extreme liquid holdout while the adjustable tread allows you to re-size the tread protection from 10-11. Stair Armor is reusable, recyclable, and made from recycled material. Place Stair Armor on the stair, tape down all edges to the stair surface, and your'e stair are protected.
View Details
|
269884 |
Ram Board Stair Armor 6pk |
4 |
43.99 |
/ PK |
RBSA36 |
|
|
Red Oak Prefinished Stair Nosing
Bruce Stair Nose 751471
A molding undercut for use as a stair landings trim, elevated floor perimeters, and stair steps. Fasten down firmly with adhesive and nails or screws. Pre-drill nail holes to prevent splitting.
Prefinished Red Oak, Natural
3/4" x 3-1/8 " x 78"
View Details
|
ROPFSN |
Red Oak Prefinished Stair Nosing |
3 |
103.99 |
/ EA |
751471 |
|
|
Red Oak Pref. T-moulding 78"
Bruce T-molding T52131041
A molding used as a transition piece from one flooring to another of equal height or to gain expansion spaces. Fasten at the heel in the center of the molding. Additional support may need to be added to the heel of the molding dependent upon the thickness of the goods covered.
Prefinished Red Oak, Natural
1/4" x 2" x 78"
View Details
|
ROPFTM |
Red Oak Pref. T-moulding 78" |
3 |
57.95 |
/ EA |
T52131041 |
|
|
Red Oak Pref. Reducer Strip 78"
Bruce Reducer 711471
A teardrop shaped molding used around fireplaces, doorways, as a room divider, or as a transition between wood flooring and adjacent floor coverings that are less thick. Fasten down with adhesive, small nails or double-faced tape.
Prefinished Red Oak, Natural
3/4" x 2-1/4 " x 78"
View Details
|
ROPFR |
Red Oak Pref. Reducer Strip 78" |
2 |
45.99 |
/ EA |
T720 |
|
